Pool and Spa Repairs

Maintaining and servicing your pool and spa equipment is essential to ensure optimal performance and longevity. If your equipment breaks down, please call us at 843-272-1248.

Our team can repair, service, upgrade, and maintain any pool equipment or systems, including:

Filters

We handle various types of filters and filtration systems, such as:

• Cartridge filter systems
• Diatomaceous earth (DE) filters
• Sand filters

Common Filter Problems:

• Excessive or low pressure
• Broken multiport (sand filter or DE)
• Excessive sand at the bottom of the pool (sand filter)
• Dirty or malfunctioning cartridge filters

Skimmers

Pool skimmers remove dirt and debris from the water's surface. They consist of the weir door, the debris basket, and the skimmer cover.

Common Skimmer Problems:

• Broken skimmer cover
• Lack of suction or blockage in the skimmer line
• Broken or missing weir door
• Melted skimmer basket

Drains

The pool drain, located at the deep end or lowest point of the pool, is part of the filtration system. Cracked or broken covers must be replaced.

We can repair, replace, or upgrade your pool’s filter or filtration system.

Circulation System

The pool’s circulation system includes the pump and pump motor. The pump pulls water from the skimmer and drain, then circulates it back through the pool's returns.

The pump motor, the powerhouse of your pool, has a lifespan of about 3-5 years. Its performance affects all other equipment in your pool.

Common Pump and Motor Issues:

• Non-operational pump, no water movement, or overheating
• Leaks due to broken gaskets or seals
• Excessive noise from bearings or debris on the impeller
• Water leakage from cracked motor seal plates
• Leaky pumps or melted fittings

We can repair, replace, or upgrade your pool motor or pump as needed.

Heating System

The heating system includes any equipment that heats your pool or spa. Popular options include:

• Heaters (using natural gas or propane)
• Heat pumps (using ambient air)

After passing through your filter, water goes through a heater or heat pump to be heated and returned to the pool.

Common Heater or Heat Pump Issues:

• Not working or firing, not providing heat
• Gas heater not working after the tank is filled
• Safety circuit or error codes
• Low flow or poor circulation

Sanitizing System

Various systems are available to clean, sanitize, and disinfect your pool, using chemical compounds like chlorine or bromine, or combinations including UV, ozone, or chlorine-generated ‘salt pools.’

Many pools now use salt-to-chlorine generation systems (also known as salt pool systems or chlorine generator systems). These state-of-the-art, environmentally friendly systems still require maintenance.

Common Salt Chlorinated Pool Issues:

• Salt cell replacement
• New control board

For any of your pool and spa repair needs, our expert team is ready to assist. Contact us at 843-272-1248 for reliable service and support.